UniMax Rail Mount Lasers
(Red, Green, and Infra-Red)

  Ultimate visibility in a low-profile package!
The LaserMax Uni-Max gives the highest power laser beam allowable by law from a package that is smaller than a matchbox! It fits on all Picatinny and Weaver rails (minimum length: 1.75”) and weighs less than an ounce (including batteries!). | Ultimate versatility!
The LaserMax Uni-Max gives a laser inside a Picatinny rail! You can mount it on pistols, carbines, rifles, shotguns, full autos, night vision gear, binoculars – anything with a Picatinny or Weaver rail. |
A few things you can do with Uni-Max:
 Uni-Max on Canon 12x36 Stabilized Binoculars
|  Uni-Green on M-4 (shown w/ optional Momentary Activation Switch and Grip Pod) |  Uni-Max "sandwiched" between Smith & Wesson M&P and tactical light |  Uni-Green on Meade EXT-90 Maksutov telescope |  Uni-Max on Mossberg 500 series Persuader |  Uni-Green on Leupold CQC rifle scope |
Keep all your rail space!
The Uni-Max doesn’t consume any rail space because you can mount gear on the top of it! Tactical lights and other lasers easily fit on top.
| Measuring for fit. To determine if the Uni-Max will fit on your pistol, simply measure from the front of your trigger guard to the first notch on your rail. If it's 1.75" (one & three quarter inches) or greater, then the Uni-Max will fit just fine! |  |
Rugged. Tested with thousands of rounds on punishing weapons including AR-15s and shotguns, both red and green Uni-Max perform flawlessly. They have also been mounted on firearms and put through multiple six-foot drop tests onto bare concrete, again without affecting the laser.
| Precise. Windage and elevation are adjusted with a small allen wrench (included). LaserMax provides generous adjustment to accommodate the many mounting configurations. The Uni-Max lasers hold alignment within 0.5 inch at 25 yards on all weapons tested. |
Only the best features! Hi-Vis pulsating beam delivers highest legal power output. Laser turns off after ten minutes to save battery life; simply toggle switch to reactivate. Maintains alignment through battery changes. Optional momentary activation switch comes in 6 and 10 inch cords.
|
 Uni-Max with 6” MAS Photo courtesy of NTOA |
Uni-Max mounted on M4 (M16Clinic Viper) Photo courtesy of NTOA
HOLSTER OPTIONS for the Uni-Max lasers.
Please note that with the exception of Cutt’s Custom Holsters, all holsters listed are open-backed to allow for attachment of accessories.
- Cutt's Customer Leather www.cuttscustomleather.com - Robert J. Cutt Jr.
- Click here to send an email
- B: (585) 865-8424 Cell: (585) 739-6554
- Makes custom thumb break Level I holsters for most guns.
- FOBUS - www.fobusholster.com
- GLT Models have a number of options including paddle, belt, home/vehicle, tactical thigh, and should holster
- Model GLT 17 Series - GLOCK 17/22/31, Ruger 345
- Model GLT 19 Series - GLOCK 19/23/32, S&W 99
- Ghost Inc. - www.ghostinc.com
- Inside the waistband concealment holster
- Works on all semi-autos with a non-proprietary regular size picatinny rail including Berettas, Glocks, H&Ks, Kimbers, Rugers, SIGs, Springfield Armory, S&W including M&P, and Taurus firearms.
- Phalanx LASH - www.smartholster.com John N. Rassias, President & CEO
- 4501 North Dixie Highway, Boca Raton, FL 33431
- B: (954) 360-0000 Fax: (561) 417-0500 Cell: (561) 789-4600
- Click here or here to contact
FEATURES SHARED BETWEEN UNI-MAX LASERS
The Uni-Max is available in different “flavors” (see next section below). However, they have many features in common:
- Accuracy (point-of-aim/point-of-impact): Adjustable for windage and elevation; holds alignment +/- 0.5 inches @ 100 yds
- Dimensions (in inches): 1.40 W x 2.27 L x 0.76 H
- Activation: Toggle switch or optional momentary activation switch (6” or 10” cords)
- Ruggedness: Survives 4’ drops to bare concrete, various orientation of gun
- Reliability: Live fire endurance testing for minimum of 5,000 rounds on various weapons (rifles with 5.56 - .338 Lapua magnum, etc.; shotgun slugs and pellets, etc.; pistol, various calibers)
- Equipment Compatibility: Fits all weapons with Picatinny (M1913) or Weaver rails 1.75” and longer
- Environmental: blowing sand, salt fog, etc. to DHS and MIL standard
DIFFERENCES BETWEEN RED, GREEN AND INFRARED UNI-MAX LASERS
The Uni-Max is available in red, green and infrared*. Other infrared options available to military only – please contact factory. All Uni-Max have nearly identical packages and can be activated with the toggle switch or the optional momentary activation switch. Differences are noted below.
| | LMS-UNI | LMS-UNI-G | LMS-UNI-IR | LMS-UNI-IR+ | | Available to: | CIV/LE/MIL | CIV/LE/MIL | Qualified LE/MIL* | Qualified LE/MIL* | | Laser Wavelength: | 635 nm (Red) | 532 nm (Green) | 850 nm (IR) | 850 nm (IR) | | Output Power: | 5 mW | 5 mW | Optimized for CQB use with NVG | Optimized for shooting with NVG | | Beam Characteristic: | Pulsating or constant-on | Pulsating (no constant-on) | Pulsating or constant-on | Pulsating or constant-on | Batteries: (all available from grocery, drug, or electronic stores, also LaserMax | Standard Silver Oxide 357 (x2) | Standard Lithium 1/3 N (x2) NSN-6135-01-398-5922 | Standard Silver Oxide 357 (x2) | Standard Silver Oxide 357 (x2) | | Battery Life: | 6 hrs (pulsing) 3 hrs (constant-on) | 1 hr pulsing only | 6 hrs (pulsing) 3 hrs (constant-on) | 6 hrs (pulsing) 3 hrs (constant-on) | Water Immersion: (fresh or salt water) | Exceeds MIL-STD-810-F; Fully functional after submersion to 66 ft. for 2 hours | Immersion for LE/MIL on request; fresh water only | Exceeds MIL-STD-810-F; Fully functional after submersion to 66 ft. for 2 hours | Exceeds MIL-STD-810-F; Fully functional after submersion to 66 ft. for 2 hours | | Operating Temperature Range: | +5 to +150 degree Fahrenheit | +40 to +100 degree Fahrenheit | +5 to +150 degree Fahrenheit | +5 to +150 degree Fahrenheit | Weight (in ounces): *includes batteries* | 0.8 | 1.0 | 0.8 | 0.8 | | Price (MSRP): | $189 | $399 | Contact factory | Contact factory | Learn More:
| Click here! | Click here! | Contact factory | Contact factory | Buy Now:
| Buy Now | Buy Now | Contact factory | Contact factory |
* Qualified law enforcement and military only. Please contact LEsales@lasermax.com orMilitarySales@lasermax.com for details.
|
|
Turn It On!
To activate the laser, simply push in on the ambidextrous activation switch with the index finger. To turn off, move activation switch to center position.
*Optional Momentary Activation Switch available!
All LaserMax products are designed and manufactured in the USA
|