 Internal Guide Rod Lasers
Top of the line. Extremely rugged, lightweight and completely internal. Widely adopted by SWAT, Special Forces, federal agencies, Presidential Security Services, and many other top tier forces. Also available to civilians for personal protection.
Available in Hi-Vis pulsating red-orange beam for civilian, law enforcement and military.
IR available to qualified LE/MIL only. Contact LEsales@lasermax.com or militarysales@lasermax.com.
Completely internal! Keep your holster, keep your tact lights, keep your favorite grips.
Extremely rugged. LaserMax internal guide rods meet or exceed both Mil-Spec and Homeland Security durability test standards (drop tests, blowing sand, temperature and humidity extremes, salt water fog, deep water immersion, 20,000+ rounds live fire).
Installation takes minutes. If you can field-strip your gun, you can install your LaserMax sight—No gunsmithing required. Click here for animation Click here for user instructions.
Hi-Vis Pulsating Beam. Pulsating gives effortless awareness of muzzle direction, transcends language barriers. Can be used outdoors from dusk till dawn, or indoors round-the-clock. IR versions optimized for NVG characteristics.
Alignment. The Internal Guide Rod lasers come permanently aligned from the factory* for center-of-mass accuracy at 20 yards. It will never drift out of alignment. There is no need to re-zero after changing batteries.
*1911 models are user-adjustable to accommodate variations in frames from different manufacturers.
Accuracy. As close to the bore of the firearm as possible, positioning allows for the closest and most consistent relationship between your point of aim and point of impact (POA/POI) over all shooting distances. Especially useful for moving targets.
Turn it on! Ambidextrous switch in custom take-down lever. Deliberate on/off activation—highly desirable in a tactical or personal defense situation!
Batteries Powered by watch or hearing aid batteries, easily found in grocery, pharmacy and electronics stores (e.g., Radio Shack). Also available from LaserMax. Order replacement batteries now.
FAQ's
| 1.) | What is the warranty on the LaserMax Internal Guide Rod Laser? Three (3) years. Excludes expendable parts (batteries, battery caps, shock buffs, recoil springs).
| | 2.) | When will the guide rod be out in green? We have built prototypes of green guide rods, and will provide green guide rods as product as soon as the technology becomes advanced enough to come in intimate contact with the gun. For now, if you want green, the Uni-Green on a Picatinny (M1913) or Weaver rail is the way to go.
| | 3.) | How long do the batteries last?We recommend that users change their batteries once a year. Shooters who practice more than average may want to change them more often. If you left you laser on continuously, they would last about 90 minutes.
| | 4.) | How much do the internal guide rod lasers cost? The GLOCKS and the XDs carry a manufacturer’s suggested retail price (MSRP) of $349. The others are $399. Discounts are available for military, law enforcement, and NRA Certified Instructors.
| | 5.) | Will the laser be aligned if my gun is compensated? Possibly not. LaserMax are sighted in for standard gun models. LaserMax does offer a custom alignment service, however. Contact customerservice@lasermax.com or call 1-800-527-3703 for assistance.
| | 6.) | Why is the beam pulsating? Our eyes notice pulsating beams faster than continuous-on beams. This is why emergency vehicles use them. This allows the user to stay aware of the muzzle direction while scanning the scene for threats, etc.
| | 7.) | Can I change the pulsating beam of my guide rod laser to a continuous-on beam? No. See #6 above.
| | 8.) | How far down range is the sight visible? If you can see your target, you will be able to see the beam provided you are using it indoors or from dusk-to-dawn outdoors. Not intended for daylight use out-of-doors.
| | 9.) | How difficult is the internal guide rod laser to install? Assuming you can field strip your weapon for cleaning your gun, you can install the LaserMax. Is usually takes a few minutes. Be sure to clear all ammo before field stripping your gun (see the manual for your gun for details).
| | 10.) | Will installing the internal guide rod laser void the warranty on my handgun? No, firearms manufacturers generally recognize the LaserMax as after-market parts that will not damage the weapon.
| | 11.) | I am thinking of installing a guide rod laser on my carry gun, exactly how reliable is it? Provided you (a) install the correct model, and (b) install it correctly, you should have no problems.
*GLOCK users note: GLOCK has changed their frames recently and some users have reported intermittency and/or switch stiffness. Most users will not be affected, but if your switch feels stiff or the laser activates or deactivates with recoil,
click here for upgrade kit. Any other questions or concerns, please call our friendly customer service team at 1-800-527-3703 or customerservice@lasermax.com and we will be happy to help you.
| | 12.) | How do I know if the LMS-1151P-FGR is the right laser to use for my GLOCK 20/21? If you have finger grooves (Figure 1) or a tactical light rail (Figure 2), use the LMS-1151P-FGR. If you have a much older model GLOCK, then you will need the saddle block included in the 1151P model. Note the models have different alignments, so be sure to choose the right one.
  |
|
Choose a model:
|
All LaserMax products are designed and manufactured in the USA
|
